PDA

View Full Version : Problem on one finantial site


Guy19550
2014-01-20, 22:44
Hello, back again !

Spyybot do not detect anything abnormal and no anomaly seen too with antivirus, no alert of malaware, but a window for payement appears (abnormal) on the finantial site under Google Chrome (no problem with Safari browser) image is here with Google Chrome :

iviewcapture_date_20_01_2014_time_11_15_48.jpg

I changed my password for the finantial site under Safari as prevention.

ERUNT is runned for the backup and the two other programs are downloaded too but not runned.

I have no idea for the problem. Thanks for help.

dds.scr was running for hours (link1) and nothing happened
dds.com was running (link3) 6 minutes and nothing happened

In the two cases, I had to shut down the computer by stopping the power

Here's de scan log with the other program :

aswMBR version 0.9.9.1771 Copyright(c) 2011 AVAST Software
Run date: 2014-01-21 00:12:44
-----------------------------
00:12:44.655 OS Version: Windows 5.1.2600 Service Pack 2
00:12:44.655 Number of processors: 1 586 0x603
00:12:44.655 ComputerName: DG-D23ECBE18879 UserName: DG
00:12:45.217 Initialize success
00:16:20.902 AVAST engine defs: 14012001
00:16:24.152 The log file has been saved successfully to "C:\Documents and Settings\DG\Mes documents\aswMBR.txt"


aswMBR version 0.9.9.1771 Copyright(c) 2011 AVAST Software
Run date: 2014-01-21 00:12:44
-----------------------------
00:12:44.655 OS Version: Windows 5.1.2600 Service Pack 2
00:12:44.655 Number of processors: 1 586 0x603
00:12:44.655 ComputerName: DG-D23ECBE18879 UserName: DG
00:12:45.217 Initialize success
00:16:20.902 AVAST engine defs: 14012001
00:16:24.152 The log file has been saved successfully to "C:\Documents and Settings\DG\Mes documents\aswMBR.txt"
00:16:57.759 Disk 0 (boot) \Device\Harddisk0\DR0 -> \Device\Scsi\nvgts1Port2Path0Target0Lun0
00:16:57.759 Disk 0 Vendor: HDS72505 K2AO Size: 476940MB BusType: 3
00:16:57.806 Disk 0 MBR read successfully
00:16:57.806 Disk 0 MBR scan
00:16:57.822 Disk 0 unknown MBR code
00:16:57.822 Disk 0 Partition 1 80 (A) 0C FAT32 LBA MSWIN4.1 100000 MB offset 2048
00:16:57.838 Disk 0 Partition - 00 05 Extended 376939 MB offset 204802048
00:16:57.853 Disk 0 Partition 2 00 0B FAT32 60000 MB offset 204804096
00:16:57.853 Disk 0 Partition - 00 05 Extended 80001 MB offset 327684096
00:16:57.869 Disk 0 scanning sectors +976773120
00:16:57.916 Disk 0 scanning C:\WINDOWS\system32\drivers
00:17:00.541 Service scanning
00:17:07.056 Modules scanning
00:17:09.790 Disk 0 trace - called modules:
00:17:09.806 ntkrnlpa.exe CLASSPNP.SYS disk.sys ACPI.sys hal.dll SCSIPORT.SYS nvgts.sys
00:17:09.806 1 nt!IofCallDriver -> \Device\Harddisk0\DR0[0x8ac14ab8]
00:17:09.806 3 CLASSPNP.SYS[b80e905b] -> nt!IofCallDriver -> \Device\00000067[0x8ac0f920]
00:17:09.806 5 ACPI.sys[b7f7e620] -> nt!IofCallDriver -> \Device\Scsi\nvgts1Port2Path0Target0Lun0[0x8ac25a38]
00:17:10.290 AVAST engine scan C:\WINDOWS
00:17:11.946 AVAST engine scan C:\WINDOWS\system32
00:17:53.803 AVAST engine scan C:\WINDOWS\system32\drivers
00:17:57.802 AVAST engine scan C:\Documents and Settings\DG
00:18:40.253 AVAST engine scan C:\Documents and Settings\All Users
00:18:47.127 Scan finished successfully
00:19:00.095 Disk 0 MBR has been saved successfully to "C:\Documents and Settings\DG\Mes documents\MBR.dat"
00:19:00.095 The log file has been saved successfully to "C:\Documents and Settings\DG\Mes documents\aswMBR.txt"

There are three things to say more :

- I had problems with Java update 45 (I think the all world knows now that there were problemes with it).
- I was passed from FAT32 to NTFS on drive C before (because of some problems to write DVD's)
- I tried to do an upgrade of Linux USB stick on this computer and also with problems (could maybe explain an MBR problem).

As a result of this three things, I began on begining with :

- Restore an old partition in FAT32 (Ghost) after reformat C drive in FAT32 (gparted), and restoring all my data on C
- Desinstall JAVA and run JAVAra to remove what was not desinstalled

After that :
- I still have te same problem
- DDS.scr and DDS.com do not give the two expected files (Nothing happening when running)
- The new aswMBR Log is here :

aswMBR version 0.9.9.1771 Copyright(c) 2011 AVAST Software
Run date: 2014-01-21 00:12:44
-----------------------------
00:12:44.655 OS Version: Windows 5.1.2600 Service Pack 2
00:12:44.655 Number of processors: 1 586 0x603
00:12:44.655 ComputerName: DG-D23ECBE18879 UserName: DG
00:12:45.217 Initialize success
00:16:20.902 AVAST engine defs: 14012001
00:16:24.152 The log file has been saved successfully to "C:\Documents and Settings\DG\Mes documents\aswMBR.txt"


aswMBR version 0.9.9.1771 Copyright(c) 2011 AVAST Software
Run date: 2014-01-21 00:12:44
-----------------------------
00:12:44.655 OS Version: Windows 5.1.2600 Service Pack 2
00:12:44.655 Number of processors: 1 586 0x603
00:12:44.655 ComputerName: DG-D23ECBE18879 UserName: DG
00:12:45.217 Initialize success
00:16:20.902 AVAST engine defs: 14012001
00:16:24.152 The log file has been saved successfully to "C:\Documents and Settings\DG\Mes documents\aswMBR.txt"
00:16:57.759 Disk 0 (boot) \Device\Harddisk0\DR0 -> \Device\Scsi\nvgts1Port2Path0Target0Lun0
00:16:57.759 Disk 0 Vendor: HDS72505 K2AO Size: 476940MB BusType: 3
00:16:57.806 Disk 0 MBR read successfully
00:16:57.806 Disk 0 MBR scan
00:16:57.822 Disk 0 unknown MBR code
00:16:57.822 Disk 0 Partition 1 80 (A) 0C FAT32 LBA MSWIN4.1 100000 MB offset 2048
00:16:57.838 Disk 0 Partition - 00 05 Extended 376939 MB offset 204802048
00:16:57.853 Disk 0 Partition 2 00 0B FAT32 60000 MB offset 204804096
00:16:57.853 Disk 0 Partition - 00 05 Extended 80001 MB offset 327684096
00:16:57.869 Disk 0 scanning sectors +976773120
00:16:57.916 Disk 0 scanning C:\WINDOWS\system32\drivers
00:17:00.541 Service scanning
00:17:07.056 Modules scanning
00:17:09.790 Disk 0 trace - called modules:
00:17:09.806 ntkrnlpa.exe CLASSPNP.SYS disk.sys ACPI.sys hal.dll SCSIPORT.SYS nvgts.sys
00:17:09.806 1 nt!IofCallDriver -> \Device\Harddisk0\DR0[0x8ac14ab8]
00:17:09.806 3 CLASSPNP.SYS[b80e905b] -> nt!IofCallDriver -> \Device\00000067[0x8ac0f920]
00:17:09.806 5 ACPI.sys[b7f7e620] -> nt!IofCallDriver -> \Device\Scsi\nvgts1Port2Path0Target0Lun0[0x8ac25a38]
00:17:10.290 AVAST engine scan C:\WINDOWS
00:17:11.946 AVAST engine scan C:\WINDOWS\system32
00:17:53.803 AVAST engine scan C:\WINDOWS\system32\drivers
00:17:57.802 AVAST engine scan C:\Documents and Settings\DG
00:18:40.253 AVAST engine scan C:\Documents and Settings\All Users
00:18:47.127 Scan finished successfully
00:19:00.095 Disk 0 MBR has been saved successfully to "C:\Documents and Settings\DG\Mes documents\MBR.dat"
00:19:00.095 The log file has been saved successfully to "C:\Documents and Settings\DG\Mes documents\aswMBR.txt"


I'm hoping this more information is usable to resolve the problem, it is past 3 O'clock in the morning here and I need some sleep.
ken545
2014-01-26, 19:48
:snwelcome:

Sorry for the delay and for your problems.

Lets try a different scanner

OTL by OldTimer

Download OTL (http://oldtimer.geekstogo.com/OTL.exe) to your desktop.
Double click on the icon to run it. Make sure all other windows are closed and to let it run uninterrupted.
When the window appears, underneath Output at the top change it to Minimal Output.
Click the "Scan All Users" checkbox.
Check the boxes beside LOP Check and Purity Check.
Click the Run Scan button. Do not change any settings unless otherwise told to do so. The scan wont take long.

When the scan completes, it will open two notepad windows. OTL.Txt and Extras.Txt.
Note:These logs can be located in the OTL. folder on you C:\ drive if they fail to open automatically.
Please copy (Edit->Select All, Edit->Copy) the contents of these files, one at a time, and post it with your next reply. You may need two posts to fit them both in.
ken545
2014-01-30, 23:37
Due to inactivity, this thread will now be closed.

If it has been three days or more since your last post, and the helper assisting you posted a response to that post to which you did not reply, your topic will not be reopened. At that point, if you still require help, please start a new topic and include a new DDS log with a link to your previous thread. Please do not add any logs that might have been requested in the closed topic, you would be starting fresh.