Zlob.ZipCodec

S

shellyjmcd

New member
Has anyone tried to manually remove the Trojan? This came up in a search on this forum but since it was posted in 2008 I'm not ready to jump through the hoops it explains.

My client has Windows 10, Spybot +AV 2.5 running on a brand new Lenovo desktop and still managed to get this trojan.

Another system has Windows 7 with the same Spybot + AV 2.5 and he managed to get the cryptowall virus.

Still having issues with trying to run Windows Defender and Spyboy concurrently.
 
Last edited by a moderator:
Hello shellyjmcd, :welcome:

shellyjmcd said:
Has anyone tried to manually remove the Trojan? This came up in a search on this forum but since it was posted in 2008 I'm not ready to jump through the hoops it explains.
Click to expand...

The topic to which you'd posted was about Spybot freezing on a definition, not that the malware was on the computers, so I split your post off to a new topic.

shellyjmcd said:
My client has Windows 10, Spybot +AV 2.5 running on a brand new Lenovo desktop and still managed to get this trojan.
Click to expand...

shellyjmcd said:
Another system has Windows 7 with the same Spybot + AV 2.5 and he managed to get the cryptowall virus.
Click to expand...

The computers are not your personal machines? CryptoWall is a file-encrypting ransomware and we can discuss that issue after I receive your response to my post. :)

shellyjmcd said:
Still having issues with trying to run Windows Defender and Spyboy concurrently.
Click to expand...

Spybot +AV and Defender on both computers? FYI: Rule of thumb is one anti virus program resident to avoid conflicts, loss of program efficiency and system lock up due to both software products attempting to access the same files at the same time.

https://www.safer-networking.org/faq/live-protection-is-conflicting-with-my-other-av-program/

Best regards.
 
Last edited:
Zlob.zipcodec

I have a similar problem. I have Windows 10 (fully updated) Spybot 2.5 (also fully updated) and every time I run a scan it ends on the Zlob.zipcodec file. Spybot just keeps running and running. I can't open "Settings" if I run "Report creator" Spybot crashes or hangs. Startup Tools also doesn't work. I have tried removing and installing Spybot again, still the same.

I have raised a ticket and sent tons of emails with screen shots of the faults, I have tried all the things suggested nothing worked, but now no one is even acknowledging my emails any more. It has been a week and a half since anyone from Spybot replied to me and I am disappointed, I would have thought that someone would at least tell me they are working on it, but nope, Nada.
 
Same problem as others

I have a similar problem. I have Windows 10 (fully updated) Spybot 2.5 (also fully updated) and every time I run a scan it ends on the Zlob.zipcodec file. Spybot just keeps running and running. I can't open "Settings" if I run "Report creator" Spybot crashes or hangs. Startup Tools also doesn't work. I have tried removing and installing Spybot again, still the same.

I have raised a ticket and sent tons of emails with screen shots of the faults, I have tried all the things suggested nothing worked, but now no one is even acknowledging my emails any more. It has been a week and a half since anyone from Spybot replied to me and I am disappointed, I would have thought that someone would at least tell me they are working on it, but nope, Nada.

Scott
 
Same Problem with zlob.zipcodec

Progress bar nearly 100%
Won't proceed any further - have waited as long as 48 hours.
Also unable to open Settings.
Uninstalled and re-installed Spybot - same problem.
Win 10 x64
Problem started a couple weeks ago.
"Stop scan" is recognized (button grays out) but scan never stops - have to kill Spybot in task manager.
 
Ditto

KenCM said:
Progress bar nearly 100%
Won't proceed any further - have waited as long as 48 hours.
Also unable to open Settings.
Uninstalled and re-installed Spybot - same problem.
Win 10 x64
Problem started a couple weeks ago.
"Stop scan" is recognized (button grays out) but scan never stops - have to kill Spybot in task manager.
Click to expand...

Having exactly the same problem as a LOT of others seem to be...

Windows 10, Spybot 2.5.42.0 (uninstalled and re-installed) to no effect.

Would be nice to see some responses from admin other than they can't replicate the problem - 'cos it seems there's a lot of us that can ;)
 
Responses

tashi said:
Hello shellyjmcd, :welcome:



The topic to which you'd posted was about Spybot freezing on a definition, not that the malware was on the computers, so I split your post off to a new topic.

OK!



The computers are not your personal machines? CryptoWall is a file-encrypting ransomware and we can discuss that issue after I receive your response to my post. :)

We ended up wiping the system with the Cryptowall - it is a nasty one, and having Spybot didn't catch it, though I suspect my client was not letting his updates run.

Spybot +AV and Defender on both computers? FYI: Rule of thumb is one anti virus program resident to avoid conflicts, loss of program efficiency and system lock up due to both software products attempting to access the same files at the same time.

https://www.safer-networking.org/faq/live-protection-is-conflicting-with-my-other-av-program/

Yes I was trying to follow our brainiac computer guys instructions on what to use but he didn't realize I had the AV version of Spybot.
Click to expand...
 
zipcodec

So bottom line on the Trojan is that it too got past Spybot and we are experiencing the same behavior as described by the others here. This particular system is a brand new Lenovo running Win10 and the very first thing I did was move her Spybot license to the new machine, created a white list and installed Office and QuickBooks. She does surf the net a bit so once I either get a solution through my trouble ticket or reinstall her OS to wipe it clean, I am going to set up her old system to surf on, it's just not safe out there even with Spybot working hard to try and protect us.

I got a quick response to my ticket but haven't heard back on my responses for 2 days now. I think we just need to know you hear us - especially considering Spybot seems to be the only thing affected by this latest version of zipcodec.

Thanks everyone.
 
I'm nore sure we are infected with zipcodec.. just hangs when running SB

shellyjmcd said:
So bottom line on the Trojan is that it too got past Spybot and we are experiencing the same behavior as described by the others here. This particular system is a brand new Lenovo running Win10 and the very first thing I did was move her Spybot license to the new machine, created a white list and installed Office and QuickBooks. She does surf the net a bit so once I either get a solution through my trouble ticket or reinstall her OS to wipe it clean, I am going to set up her old system to surf on, it's just not safe out there even with Spybot working hard to try and protect us.

Its unclear to me if my machine is infected with Zipcodec - whatever that is. I don't think so as there are no issues I can see - other than Spybot does not finish the scan - ever. (as many have reported). Is there some way to tell if I have Zipcodec on my computer? I have looked and searched the suggested files, but nothing on my computer seems to show Zipcodec. I would imagine all others are in the same boat - nothing showing Zipcodec on their systems either.

Yes, no info from SB is very concerning - can't imagine why there is NO response. Perhaps they are all on vacation? (for the next months)

sc
Click to expand...
 
same issue spybot 2.5 gets to 100% and sits

i am also running an upgraded windows 10 64bit. windows defender runs a clean scan but i have had viruses and malware before that were not caught by defender so i researched spybot and downloaded it. it has fully updated and i have run it with no results, my first scan ran to 98% after 4 hours of waiting with no other progress i closed it and reran the scan and left it for the night, at 5 am it said 100% but nothing else. closed rebooted the system and tried again and left for a few hours with it running, when i returned again it sat at 100% but never told me anything more just sat. i then looked up the issue and did some of the suggested things like disabling cookies and turning off my defender and shutting down all my windows and running processes and tried to run another scan, again i have made it to 100% but have been sitting at 100% for over an hour. other than finding another malware program that will complete the scan im at a loss and as i have read this seems to be an issue for a lot of people and no one seems to be answering how to fix the issue. any suggestions to getting the program to complete the process would be appreciated
 
One more

Not sure how useful it is to pile on, but I've come to this forum for the very same issue. Discouraging to hear that there is no apparent understanding of the problem, let alone a solution.
 
Disappointed ..

... that, 1 week later (from my thread) and longer, for others, there's no reply from anyone in authority here.

I've always been a big fan of Spybot, but this lack of response on their official forum is very off-putting :(
 
Thanks for the free software spybot team. I, unfortunately am having the same issue.

Windows 10 Home
i7-4720hq
 
More of the Same

As posted by others, my SpyBot scans are ending and freezing at Zlob.ZipCodec. Additionally, I noted that each time it freezes it is apparently on "4E2AFAC", which cannot locate anywhere on my machine when I search for it.

At another site, the "solution" suggested was to disable SpyBot until they find and inform us of a solution.
 
jsexton9 said:
As posted by others, my SpyBot scans are ending and freezing at Zlob.ZipCodec. Additionally, I noted that each time it freezes it is apparently on "4E2AFAC", which cannot locate anywhere on my machine when I search for it.

At another site, the "solution" suggested was to disable SpyBot until they find and inform us of a solution.
Click to expand...

Until ?

IF, seems more likely at the moment, given the overwhelming silence from them :(
 
same here scan stuck at ZipZlobCodec

Dear Costello99, Dear Spybot Team,:oreo:
I have the same problem: Win10, Spybot 2.5 + AV pro (both fully updated), it first occurred on the 8th of February 2016. Before that, I never had a problem with Spybot! Now, the Settings won't open either, Report creator crashes and Start Up Tools crashes. I removed and reinstalled ALL, even the hidden Spybot files, lost my licence key in the process, got it sent to me again by a helpful spybot sales team, have everything re-installed and running - all the problems are still there!!!! Even on a repair environment scan - all problems show as above! :lip:
...I really hope there's someone out there at spybot who can help!
love and greetings, ch


Costello99 said:
I have a similar problem. I have Windows 10 (fully updated) Spybot 2.5 (also fully updated) and every time I run a scan it ends on the Zlob.zipcodec file. Spybot just keeps running and running. I can't open "Settings" if I run "Report creator" Spybot crashes or hangs. Startup Tools also doesn't work. I have tried removing and installing Spybot again, still the same.

I have raised a ticket and sent tons of emails with screen shots of the faults, I have tried all the things suggested nothing worked, but now no one is even acknowledging my emails any more. It has been a week and a half since anyone from Spybot replied to me and I am disappointed, I would have thought that someone would at least tell me they are working on it, but nope, Nada.
Click to expand...
 
same here scan stuck at ZipZlobCodec

same here since the 8th of Feb 2016

...and stuck at the exact File number!

already contacted the tech support - last I got in reply was:

"Thank you for contacting The Spybot Support Team at Safer-Networking Ltd.

We will respond to your support query email as soon as one of our team members becomes available. If you have not already done so it might be worthwhile checking our Support Forums.

Office Opening Hours:
Monday – Friday
09:00 – 17:00 GMT

During holiday periods there may be a delay before you get a response due to reduced staffing levels.

If you want to add more information please reply to this email or use the ticket number below in the subject line of your email.

Ticket number: 2016021980000068

If you do not use this ticket number it may delay your getting a response.


The Spybot Support Team."
 
Last edited:
No Joy

Tried stopping all unnecessary services and killing all unnecessary processes to no avail.
Also tried safe booting - also to no avail.
It would sure be great to get some official word on this.
Is there someplace else other than this thread that might elicit an official response?
Really like Spybot but about ready to remove it altogether and forget about it.
 
Ongoing problem several months now

I am still having the problem of the scan getting hung up on zlobzipcodec for many months now. Now I can't access the settings either, when you try to access settings the UAC pops up, you select YES, then nothing happens. I have been using various versions of spybot for years and never had this issue. Why doesn't the programmers or the spybot team at least acknowledge there is a problem and many people are having it. At least they could say they are working on it.
 
You must log in or register to reply here.
Back
Top